AITECH247 VI ☎ +84 393 188 881
Industrial software & embedded devices

The numbers you are estimating, we make measurable

The real output of a shift. The number of animals in a batch. A gauge only a person standing in front of it can read. The frame beside this is counting for real, on your device, and the image goes nowhere.

Count your own photograph Talk to an engineer

The four tools below are demonstrations, free for 10 runs a day, so you can see the kind of problem we take on.

COUNTING · IMAGES NEVER LEAVE YOUR DEVICE
headunit
value in the sample image
Open the full tool →

The image in the frame is generated by this page and comes with the true value, so you can check the result yourself. Pick another scene to see another kind of problem.

Two dial gauges on a pipe run, with an industrial camera mounted opposite, looking at the dial
A pressure gauge on a running machine. The camera is mounted outside it and touches nothing.
Factories · one kind of problem

A press that has run for years, no data port, the night shift writes the reading down every two hours

Between two entries there are nearly two hours in which nobody knows where the pressure went. A camera looking at the dial reads it every 5 seconds, records it, and keeps the image it was read from.

  1. No stoppage, no mechanical change, no rewiring
  2. Every reading is stored with its image, so an inspector can check it
  3. The same camera can read codes, count cartons or check protective equipment
Hatcheries · one kind of problem

Delivering 200,000 post-larvae: count three trays and multiply

A 4% difference is normal, and it is 8,000 animals the two sides have to argue over. Photograph the whole tray, mark every animal, and both sides sign against the same image.

  1. One image per tray, the result stored with its reference image
  2. Clusters are outlined separately for the inspector to decide
  3. The same method for chicks, eggs and seedlings in propagation trays
A counting tray under an industrial camera, every animal on the tray marked
A tray of post-larvae under even lighting. The rings are the result layer over the original image.
What we take on

Fourteen kinds of problem, three levels of readiness

Try it nowIn calibrationProject based
Factories
Dial gauges read by camera Try
Codes on poor surfaces Try
Counting products, cartons and pallets Try
Vehicle plate recognition Try
Comparison against a reference sample 20–50 good images, no labelling Calibrating
Protective equipment compliance no facial images kept Calibrating
Labels, expiry dates and serial numbers Project
Livestock and controlled-environment farming
Counting shrimp and fish fry Try
Counting day-old chicks and eggs empty cells flagged Try
Counting livestock Try
Counting seedlings in propagation trays Try
Weight estimated from images Calibrating
Barn and greenhouse climate Project
Feed conversion tracking by batch Project
What we do

Every customer has their own problem

What you have seen so far covers the common part of the requirement. Your site always has something specific to it — an older machine, a process of your own, a form built to an internal standard. Describe what you need; an engineer will call you back, confirm whether it is feasible and tell you which budget range it falls into.

  • A straight answer on feasibility during the call
  • The budget range that matches your requirement
  • An engineer who has built this kind of system before

↳ The person who calls is the engineer who builds the system.

By sending this you agree to be contacted by AITECH247 about your requirement. Your number is used for nothing else. Privacy policy